| Category | Item | Qty | Weight | Total |
| Body | Chassis | 1 | 290.0 | 290.0 |
| Body | Door hinges (upper) | 2 | 2.0 | 4.0 |
| Body | Door hinges (lower) | 1 | 1.0 | 2.0 |
| Body | Door | 2 | 22.0 | 44.0 |
| Body | Front fender | 2 | 7.0 | 14.0 |
| Body | Hood | 1 | 28.0 | 28.0 |
| Body | Rear deck lid | 1 | 18.0 | 18.0 |
| Body | Rear wheel tubs | 2 | 2.0 | 4.0 |
| Body | Windshield, front | 1 | 24.0 | 24.0 |
| Body | Windshield, rear | 1 | 16.0 | 16.0 |
| Brakes | Caliper, front, with pads, bolts | 2 | 7.0 | 14.0 |
| Brakes | Caliper, rear | 2 | 9.0 | 18.0 |
| Brakes | Front rotor, hat, hub, bearings | 2 | 13.0 | 26.0 |
| Brakes | Pedal assembly / master cylinders | 1 | 9.0 | 9.0 |
| Brakes | Rotor, rear | 2 | 9.0 | 18.0 |
| Drivetrain | Clutch disc | 1 | 3.0 | 3.0 |
| Drivetrain | Clutch pressure plate | 1 | 10.0 | 10.0 |
| Drivetrain | Differential with susp. brackets | 1 | 105.0 | 105.0 |
| Drivetrain | Driveshaft | 1 | 10.0 | 10.0 |
| Drivetrain | Flywheel | 1 | 29 | 29 |
| Drivetrain | Transmission | 1 | 78.0 | 78.0 |
| Drivetrain | Transmission crossmember | 1 | 4.5 | 4.5 |
| Drivetrain | Transmission mount | 1 | 1.5 | 1.5 |
| Electrical | Battery | 1 | 15.0 | 15.0 |
| Electrical | Ignition coils | 2 | 1.0 | 2.0 |
| Electrical | Distributor | 1 | 3.5 | 3.5 |
| Electrical | Gauges, switches | 1 | 3.0 | 3.0 |
| Engine | Alternator with brackets and pulley | 1 | 12.0 | 12.0 |
| Engine | Engine with front cover and pulley | 1 | 180.0 | 180.0 |
| Engine | Engine mount | 1 | 2.0 | 2.0 |
| Engine | Oil pan | 1 | 3.0 | 3.0 |
| Engine | Radiator with fan | 1 | 13.0 | 13.0 |
| Engine | Starter | 1 | 11.5 | 11.5 |
| Engine | Water pump, housing, pulley, thermostat | 1 | 15.0 | 15.0 |
| Exhaust | Exhaust tubing | 1 | 6.0 | 6.0 |
| Exhaust | Muffler | 1 | 9.0 | 9.0 |
| Fasteners* | Fasteners | 1 | 8.0 | 8.0 |
| Front Suspension | Ball joint, knuckle, control arm | 2 | 6.0 | 12.0 |
| Front Suspension | Front subframe | 1 | 10.0 | 10.0 |
| Front Suspension | Front sway bar | 1 | 7.0 | 7.0 |
| Front Suspension | Front sway bar arms | 2 | 2.0 | 4.0 |
| Front Suspension | Front sway bar mounts and links | 2 | 1.0 | 2.0 |
| Front Suspension | Shock | 2 | 4.0 | 8.0 |
| Front Suspension | Spring | 2 | 2.0 | 4.0 |
| Front Suspension | Strut with shock nuts | 2 | 10.0 | 20.0 |
| Front Suspension | Tension rods | 2 | 2.0 | 4.0 |
| Fuel System | Air cleaner | 1 | 1.5 | 1.5 |
| Fuel System | Carburetor | 1 | 12.0 | 12.0 |
| Fuel System | Fuel filter and lines | 1 | 3.0 | 3.0 |
| Fuel System | Fuel pump with mount and fittings | 1 | 2.0 | 2.0 |
| Fuel System | Fuel tank and mounts | 1 | 12.0 | 12.0 |
| Interior | Dashboard | 1 | 3.0 | 3.0 |
| Interior | Seats | 2 | 14.0 | 28.0 |
| Rear Suspension | Carrier | 2 | 8.0 | 16.0 |
| Rear Suspension | Coil-over top mount | 2 | 2.0 | 4.0 |
| Rear Suspension | Coil-overs | 4 | 5.0 | 20.0 |
| Rear Suspension | Control arm | 2 | 16.0 | 32.0 |
| Rear Suspension | Differential mount | 1 | 8.0 | 8.0 |
| Rear Suspension | Half shaft | 2 | 15.0 | 30.0 |
| Rear Suspension | Hub | 2 | 6.0 | 12.0 |
| Rear Suspension | Jacking plate | 1 | 3.5 | 3.5 |
| Rear Suspension | Radius rod mount | 1 | 2.5 | 2.5 |
| Rear Suspension | Radius rods | 2 | 1.5 | 3.0 |
| Rear Suspension | Rear sway bar | 1 | 2.7 | 2.7 |
| Rear Suspension | Rear sway bar arms | 2 | 0.5 | 1.0 |
| Rear Suspension | Rear sway bar mounts and links | 2 | 1.0 | 2.0 |
| Rear Suspension | Tie bar, front | 1 | 3.5 | 3.5 |
| Rear Suspension | Tie bar, rear | 1 | 4.0 | 4.0 |
| Roll Cage | Crossmember rail brace | 2 | 1.5 | 3.0 |
| Roll Cage | Crossmember rails | 2 | 4.5 | 9.0 |
| Roll Cage | Crossmember, main | 1 | 15.0 | 15.0 |
| Roll Cage | Crossmember, rear | 1 | 10.0 | 10.0 |
| Roll Cage | Dash bar | 1 | 4.0 | 4.0 |
| Roll Cage | Door X | 2 | 9.0 | 18.0 |
| Roll Cage | Halo | 1 | 11.0 | 11.0 |
| Roll Cage | Halo diagonal | 1 | 3.5 | 3.5 |
| Roll Cage | Main hoop | 1 | 21.0 | 21.0 |
| Roll Cage | Main hoop diagonal | 1 | 4.0 | 4.0 |
| Roll Cage | Main hoop horizontal | 1 | 3.0 | 3.0 |
| Roll Cage | Main hoop to rear xmember diag | 1 | 4.0 | 4.0 |
| Roll Cage | Main hoop to rear xmember posts | 2 | 6.0 | 12.0 |
| Roll Cage | Square tubing behind rear crossmember | 1 | 8.0 | 8.0 |
| Roll Cage | Strut tower braces | 2 | 2.5 | 5.0 |
| Roll Cage | Windshield post bar | 2 | 6.5 | 13.0 |
| Steering | Steering rack | 1 | 9.0 | 9.0 |
| Steering | Steering column with bearings | 1 | 3.0 | 3.0 |
| Steering | Steering side rod assembly | 2 | 2.0 | 4.0 |
| Steering | Steering wheel with coupler & pad | 1 | 3.2 | 3.2 |
| Turbo setup | Air cleaner / filter | 1 | 1.5 | 1.5 |
| Turbo setup | Carburetor with fuel lines | 1 | 13.5 | 13.5 |
| Turbo setup | Carb adapter | 1 | 4.0 | 4.0 |
| Turbo setup | Compressor outlet | 1 | 1.5 | 1.5 |
| Turbo setup | Manifold, exhaust | 1 | 10.0 | 10.0 |
| Turbo setup | Manifold, intake | 1 | 5.0 | 5.0 |
| Turbo setup | Turbine outlet | 1 | 7.5 | 7.5 |
| Turbo setup | Turbocharger | 1 | 15.0 | 15.0 |
| Turbo setup | Wastegate | 1 | 2.5 | 2.5 |
| Wheels and Tires | Front tires | 2 | 18.0 | 36.0 |
| Wheels and Tires | Front wheels | 2 | 18.0 | 36.0 |
| Wheels and Tires | Rear tires | 2 | 16.5 | 33.0 |
| Wheels and Tires | Rear wheels | 2 | 20.0 | 40.0 |
| Total weight | 1697.9 | |||
*How did I come up with a figure of 8 pounds for fasteners? Easy! When I disassembled the car for painting, I put all the fasteners and small
hardware in plastic bags which were labeled. Then I placed all of these plastic bags together on the scale.