Ad | Body | Interior | Engine | Mechanical | Options | Spare parts | Status
 

These tasks are complete — body

• Body installation and panel alignment
• Body alignment pins on front and rear clip (attached to aluminum chassis)
• Sturdy fiberglass extensions everywhere the gaps were too wide
• Hartwell latches
• Door hinges, door handles, and door limiting straps
• Door latches, stainless strikers, and stainless striker brackets
• Headlights, turn signals, and tail lights
• Windshield wiper relocated to driver's side
• Dzus fasteners on front clip insert
• Hood pins on rear clip
• Vent panels on rear clip (polished ceramic coated)
• Weatherstripping on doors and rear clip
• Cut-outs for NACA ducts, radiator outlet, induction, rear clip air outlets
• Rear clip limiting straps
• Reinforced spider attachments
• Tire to rocker panel clearance
• Three body working bucks with casters

These tasks are complete — engine and drivetrain

• Engine, flywheel, starter, clutch, clutch release, transaxle
• External clutch release setup
• Engine accessories including alternator, AC compressor, and belts
• Aviaid dipstick, carefully calibrated
• Lokar throttle cable and bracket

These tasks are complete — other

• Seats
• CNC performance parts shifter and shift cable adapter
• Control Cables shift cables
• Pedals
• Steering
• Radiator, fans, and cooling system
• Ignition system and MSD 6AL-2
• Fuel tanks, fuel fillers, and fuel system
• Windshield wiper, heavy duty motor mounted to chassis
• Reinforced rear tray and body support
• All brake and clutch lines
• Hand brake (parking brake)
• Dashboard including gauges and switch panels
• Reinforcement and straightening brace under dash
• AC and heater
• AC air hoses routed without cutting into chassis dash structure
• Electrical system except for final connections to lights on body
• Odyssey battery with circuit breaker and switch
• Custom-made battery and starter cables
• Many powder coated parts including suspension links, rear engine plate, roll bar, etc.

These tasks need to be finished — body

• Door pockets
• Inside door handles
• Install windows and headlight covers
• License plate mount
• Finish body gaps
• Sanding, blocking, and paint
• Windshield installation
• There are probably more minor tasks that I have forgotten

These tasks need to be finished — other

• Install and torque axle bolts
• Finish exhaust bracket (working on it now)
• Rear firewall (working on it now)
• Coolant overflow tank
• Add fluids (brakes, clutch, engine oil, gear oil, coolant, fuel)
• Bleed brakes and clutch
• Evacuate and charge AC system
• Electrical connections to lights on body
• Carpet is not finished (not glued to chassis)
• There are probably more minor tasks that I have forgotten